Bonnet clips not engaging

All Volvo XC40 related discussions
Post Reply
AndyP
Posts: 32
Joined: Thu Apr 19, 2018 8:41 pm

Post by AndyP »

Just quick note looking at car today noticed bonnet higher on one side in my case drivers side. Investigated a little and looks like one of the holding brackets is not locking into the lock mechanism. Hence bonnet moves a little on one side when I drive along. Dealer says quick fix so will pop in with it next week. Dealer has seen this on other XC40s
T5 FE Bursting Blue 19” Wheels plus Towbar

User avatar
be0ne
Posts: 19
Joined: Sat Apr 21, 2018 2:10 pm

Post by be0ne »

I had a similar issue when I collected the car the bonnet was slightly misaligned on one side.
Dealer fixed it really easily. There are 2 plastic/ruber "screws" under the bonnet, one on each side. You can turn them to adjust the height and allow the bonnet to fit properly.

I hope it can help ;)
XC40 T3 R-Design (+packs & options) ordered in March - delivered August.
User avatar
Boomer
Posts: 585
Joined: Wed Jan 17, 2018 2:35 pm
Location: UK

Post by Boomer »

From what I have read previously not just an issue with the XC40.
XC40 FE [MY18] | T5 AWD Auto | Crystal White | 20" | Lava | Apr 18
Post Reply